Short answer
Most feature screenplays are somewhere around 90 to 120 pages. That range is a convention, not a rule, but it reflects what readers and producers expect when they pick up a spec script. A first-time writer is generally advised to stay within it, since a very long script can look undisciplined and a very short one can look underdeveloped.
Typical page counts
These are rough norms. Individual projects and markets differ.
| Type | Common range |
|---|---|
| Feature film | About 90 to 120 pages |
| Feature comedy | Often toward the shorter end, around 90 to 100 pages |
| Feature drama | Often a little longer, up to about 120 pages |
| Half-hour TV episode | Roughly 25 to 35 pages |
| One-hour TV episode | Roughly 50 to 65 pages |
| Short film | Commonly under 30 pages, often 5 to 15 |
TV page counts vary with format (single-camera or multi-camera), network and streaming platform, so check a sample script from the show you are writing for.
Why one page is about one minute
The idea that one page equals about one minute of screen time comes from the standard format: Courier 12, standard margins, and white space for action and dialogue. It is a rough estimator. A page of rapid dialogue may run less than a minute, while a page of heavy action description may run longer or shorter depending on how it is shot. Over a whole script, the estimate is usually closer to correct than for any single page. See screenplay font and margins for the settings behind it.
Word counts
Page count is the usual measure in screenwriting, not word count. Because scripts have large amounts of white space, the number of words per page varies a lot. Feature scripts often fall somewhere in a broad range of roughly 15,000 to 25,000 words, but treat that as a loose guide rather than a target. For more on this, see how many words a two-hour movie script is.
Is 120 pages too long? Is 70 pages too short?
A 120-page script is at the upper edge of what is usually accepted for a feature. It is not automatically too long, but readers may scrutinize it more, and trimming is often a good exercise. A script well over 120 pages may need strong justification.
A 70-page script is short for a feature. It might suit a short feature, a low-budget project or a very particular genre. If it is meant to be a standard feature, check whether the story is fully developed, in particular the second act. Page counts for the individual acts are discussed in how long a first act should be.
Short films and video scripts
Short films are commonly written at about one page per minute as well, so a 10-minute short is around 10 pages. For non-fiction or online video scripts, such as narration for a 10-minute video, the length depends on speaking pace. Many people speak at a rate somewhere around 130 to 160 words per minute, which would put 10 minutes at roughly 1,300 to 1,600 words of spoken text. That is an estimate, and it excludes pauses, visuals and music, so test it by reading your script aloud with a timer.
How to check your length
- Use screenwriting software’s page count, set to standard format
- Read the script aloud or have it read to you, and time it
- Compare against produced scripts in the same genre
- Cut scenes that repeat an earlier beat
Length problems are often really pacing problems. The complete screenplay format guide shows how the layout affects page count.