Standard settings at a glance
| Setting | Common value |
|---|---|
| Font | Courier (or Courier New, or a similar Courier-style font such as Courier Prime) |
| Size | 12 point |
| Paper | US Letter, 8.5 x 11 in (A4 outside North America) |
| Left margin | About 1.5 in |
| Right margin | About 1 in (some programs allow a little more or less) |
| Top and bottom margins | About 1 in |
| Line spacing | Single |
Dedicated screenwriting software sets all of this for you. The numbers below matter mostly if you are building your own template in a word processor. See free screenplay templates and using Google Docs for a script.
Why Courier 12
Courier is a monospaced font, meaning every character takes up the same width. This is a historical choice rooted in the typewriter era, but it still does useful work: because the width of every letter is the same, a page holds a fairly predictable amount, which is why the one-page-per-minute estimate works as well as it does. See how long a screenplay should be.
It is also a convention that readers expect. A script in another font can look unfamiliar, and some screenwriting contests and companies state Courier 12 as a requirement. Stick to it unless told otherwise. Variants such as Courier Final Draft, Courier Prime and Courier New are all used. They look slightly different but are close in width.
Use regular weight. Avoid bold, italic and underline except for rare, deliberate cases, and avoid fancy styling altogether.
Margins
The left margin is wider (about 1.5 inches) to leave room for binding on paper scripts. The right margin is about 1 inch, though the right edge of a script page looks a bit ragged because lines are not justified. Top and bottom margins are about 1 inch. Page numbers sit in the header at the top right, slightly above the first line of text.
Do not shrink the margins or use a smaller font to squeeze in more text. It changes the page count and readers notice.
Element indents
The placement of each element is also standardized. These approximate values are measured from the left edge of the page, based on common defaults in screenwriting software. They vary a little between programs.
| Element | Left edge of text | Right edge of text |
|---|---|---|
| Scene heading | 1.5 in | 7.5 in |
| Action | 1.5 in | 7.5 in |
| Character name | about 3.7 in | 7.5 in |
| Dialogue | about 2.5 in | about 6.0 in |
| Parenthetical | about 3.1 in | about 5.5 in |
| Transition | about 6.0 in (right-aligned) | about 7.1 in |
In a word processor with a 1.5 inch left margin and a 1 inch right margin, convert these to paragraph indents. The left indent is the left edge value minus 1.5 inches. The right indent is 7.5 inches minus the right edge value. For dialogue, that gives a left indent of about 1.0 inch and a right indent of about 1.5 inches. Compare the result with a script exported from screenwriting software and adjust until the layout matches.
Lines per page
With Courier 12 and single spacing, a page generally holds about 55 lines of text, though the exact figure depends on the program. This is a reason not to use double spacing: it would roughly halve the lines per page and distort the page count. See the complete screenplay format guide for how line spacing works between elements.
US Letter vs A4
The standard is US Letter in North America. In the UK, Europe and elsewhere, A4 is common, and some contests outside North America ask for it. A4 is slightly taller and narrower, so a script’s page count can differ slightly between the two. If you are submitting to a particular contest or company, follow their guidelines.
Putting it into practice
A quick check: print or export your script to PDF and compare it to a produced script from the same genre. If the shapes of the text blocks look similar, you are close. For the other conventions on the page, including the title page, see how to format a screenplay title page and the complete screenplay format guide.